Checklist for a production peer¶
As you prepare to build a production peer, you need to customize the configuration by editing the core.yaml file, which is copied into the
/config directory when downloading the Fabric binaries, and available within the Fabric peer image at
While in a production environment you could override the environment variables in the
core.yaml file in your Docker container or your Kubernetes job, these instructions show how to edit
core.yaml instead. It’s important to understand the parameters in the configuration file and their dependencies on other parameter settings in the file. Blindly overriding one setting using an environment variable could affect the functionality of another setting. Therefore, the recommendation is that before starting the peer, you make the modifications to the settings in the configuration file to become familiar with the available settings and how they work. Afterwards, you may choose to override these parameters using environment variables.
This checklist covers key configuration parameters for setting up a production network. Of course, you can always refer to the core.yaml file for additional parameters or more information. It also provides guidance on which parameters should be overridden. The list of parameters that you need to understand and that are described in this topic include:
# The peer id provides a name for this peer instance and is used when # naming docker resources. id: jdoe
id: (Default value should be overridden.) Start by giving your peer an ID (which is analogous to giving it a name). Often the name indicates the organization that the peer belongs to, for example
peer0.org1.example.com. It is used for naming the peer’s chaincode images and containers.
# The networkId allows for logical separation of networks and is used when # naming docker resources. networkId: dev
networkId: (Default value should be overridden.) Specify any name that you want. One recommendation would be to differentiate the network by naming it based on its planned usage (for example, “dev”, “staging”, “test”, ”production”, etc). This value is also used to build the name of the chaincode images and containers.
# The Address at local network interface this Peer will listen on. # By default, it will listen on all network interfaces listenAddress: 0.0.0.0:7051
listenAddress: (Default value should be overridden.) Specify the address that the peer will listen on, for example,
# The endpoint this peer uses to listen for inbound chaincode connections. # If this is commented-out, the listen address is selected to be # the peer's address (see below) with port 7052 chaincodeListenAddress: 0.0.0.0:7052
chaincodeListenAddress: (Default value should be overridden.) Uncomment this parameter and specify the address where this peer listens for chaincode requests. It needs to be different than the
peer.listenAddress, for example,
# The endpoint the chaincode for this peer uses to connect to the peer. # If this is not specified, the chaincodeListenAddress address is selected. # And if chaincodeListenAddress is not specified, address is selected from # peer address (see below). If specified peer address is invalid then it # will fallback to the auto detected IP (local IP) regardless of the peer # addressAutoDetect value. chaincodeAddress: 0.0.0.0:7052
chaincodeAddress: (Default value should be overridden.) Uncomment this parameter and specify the address that chaincode containers can use to connect to this peer, for example,
# When used as peer config, this represents the endpoint to other peers # in the same organization. For peers in other organization, see # gossip.externalEndpoint for more info. # When used as CLI config, this means the peer's endpoint to interact with address: 0.0.0.0:7051
address: (Default value should be overridden.) Specify the address that other peers in the organization use to connect to this peer, for example,
mspConfigPath: (Default value should be overridden.) This is the path to the peer’s local MSP, which must be created before the peer can be deployed. The path can be absolute or relative to
FABRIC_CFG_PATH(by default, it is
/etc/hyperledger/fabricin the peer image). Unless an absolute path is specified to a folder named something other than “msp”, the peer defaults to looking for a folder called “msp” at the path (in other words,
FABRIC_CFG_PATH/msp) and when using the peer image:
/etc/hyperledger/fabric/msp. If you are using the recommended folder structure described in the Registering and enrolling identities with a CA topic, it would be relative to the FABRIC_CFG_PATH as follows:
config/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp. The best practice is to store this data in persistent storage. This prevents the MSP from being lost if your peer containers are destroyed for some reason.
# Identifier of the local MSP # ----!!!!IMPORTANT!!!-!!!IMPORTANT!!!-!!!IMPORTANT!!!!---- # Deployers need to change the value of the localMspId string. # In particular, the name of the local MSP ID of a peer needs # to match the name of one of the MSPs in each of the channel # that this peer is a member of. Otherwise this peer's messages # will not be identified as valid by other nodes. localMspId: SampleOrg
localMspId: (Default value should be overridden.) This is the value of the MSP ID of the organization the peer belongs to. Because peers can only be joined to a channel if the organization the peer belongs to is a channel member, this MSP ID must match the name of at least one of the MSPs in each of the channels that this peer is a member of.
# Path on the file system where peer will store data (eg ledger). This # location must be access control protected to prevent unintended # modification that might corrupt the peer operations. fileSystemPath: /var/hyperledger/production
fileSystemPath: (Default value should be overridden.) This is the path to the ledger and installed chaincodes on the local filesystem of the peer. It can be an absolute path or relative to
FABRIC_CFG_PATH. It defaults to
/var/hyperledger/production. The user running the peer needs to own and have write access to this directory. The best practice is to store this data in persistent storage. This prevents the ledger and any installed chaincodes from being lost if your peer containers are destroyed for some reason. Note that ledger snapshots will be written to
ledger.snapshots.rootDir, described in the ledger.* section.
gossip: # Bootstrap set to initialize gossip with. # This is a list of other peers that this peer reaches out to at startup. # Important: The endpoints here have to be endpoints of peers in the same # organization, because the peer would refuse connecting to these endpoints # unless they are in the same organization as the peer. bootstrap: 127.0.0.1:7051 # Overrides the endpoint that the peer publishes to peers # in its organization. For peers in foreign organizations # see 'externalEndpoint' endpoint: # This is an endpoint that is published to peers outside of the organization. # If this isn't set, the peer will not be known to other organizations and will not be exposed via service discovery. externalEndpoint: # NOTE: orgLeader and useLeaderElection parameters are mutual exclusive. # Setting both to true would result in the termination of the peer # since this is undefined state. If the peers are configured with # useLeaderElection=false, make sure there is at least 1 peer in the # organization that its orgLeader is set to true. # Defines whenever peer will initialize dynamic algorithm for # "leader" selection, where leader is the peer to establish # connection with ordering service and use delivery protocol # to pull ledger blocks from ordering service. useLeaderElection: false # Statically defines peer to be an organization "leader", # where this means that current peer will maintain connection # with ordering service and disseminate block across peers in # its own organization. Multiple peers or all peers in an organization # may be configured as org leaders, so that they all pull # blocks directly from ordering service. orgLeader: true # Gossip state transfer related configuration state: # indicates whenever state transfer is enabled or not # default value is false, i.e. state transfer is active # and takes care to sync up missing blocks allowing # lagging peer to catch up to speed with rest network enabled: false pvtData: implicitCollectionDisseminationPolicy: # requiredPeerCount defines the minimum number of eligible peers to which the peer must successfully # disseminate private data for its own implicit collection during endorsement. Default value is 0. requiredPeerCount: 0 # maxPeerCount defines the maximum number of eligible peers to which the peer will attempt to # disseminate private data for its own implicit collection during endorsement. Default value is 1. maxPeerCount: 1
Peers leverage the Gossip data dissemination protocol to broadcast ledger and channel data in a scalable fashion. Gossip messaging is continuous, and each peer on a channel is constantly receiving current and consistent ledger data from multiple peers. While there are many Gossip parameters that can be customized, there are three groups of settings you need to pay attention to at a minimum:
- Endpoints Gossip is required for service discovery and private data dissemination. To use these features, you must configure the gossip
externalEndpointparameters in addition to setting at least one anchor peer in the peer’s channel configuration.
bootstrap: (Default value should be overridden.) Provide the list of other peer addresses in this organization to discover.
endpoint: (Default value should be overridden.) Specify the address that other peers in this organization should use to connect to this peer. For example,
externalEndpoint:(Default value should be overridden.) Specify the address that peers in other organizations should use to connect to this peer, for example,
- Block dissemination In order to reduce network traffic, it is recommended that peers get their blocks from the ordering service instead of from other peers in their organization (the default configuration starting in Fabric v2.2). The combination of the
state.enabledparameters in this section ensures that peers will pull blocks from the ordering service.
falseas of v2.2, which is recommended so that peers get blocks from ordering service.) When
useLeaderElectionis set to false, you must configure at least one peer to be the org leader by setting
peer.gossip.orgLeaderto true. Set
useLeaderElectionto true if you prefer that peers use Gossip for block dissemination among peers in the organization.
trueas of v2.2, which is recommended so that peers get blocks from ordering service.) Set this value to
falseif you want to use Gossip for block dissemination among peers in the organization.
falseas of v2.2 which is recommended so that peers get blocks from ordering service.) Set this value to
truewhen you want to use Gossip to sync up missing blocks, which allows a lagging peer to catch up with other peers on the network.
- Implicit data Fabric v2.0 introduced the concept of private data implicit collections on a peer. If you’d like to utilize per-organization private data patterns, you don’t need to define any collections when deploying chaincode in Fabric v2.*. Implicit organization-specific collections can be used without any upfront definition. When you plan to take advantage of this new feature, you need to configure the values of the
pvtData.implicitCollectionDisseminationPolicy.maxPeerCount. For more details, review the Private data tutorial.
pvtData.implicitCollectionDisseminationPolicy.requiredPeerCount: (Recommended that you override this value when using private data implicit collections.) New in Fabric 2.0. It defaults to 0, but you will need to increase it based on the number of peers belonging to your organization. The value represents the required number of peers within your own organization that the data must be disseminated to, to ensure data redundancy in case a peer goes down after it endorses a transaction.
pvtData.implicitCollectionDisseminationPolicy.maxPeerCount: (Recommended that you override this value when using private data implicit collections.) New in Fabric 2.0. This is an organization-specific collection setting that is used to ensure the private data is disseminated elsewhere in case this peer endorses a request and then goes down for some reason. While the
requiredPeerCountspecifies the number of peers that must get the data, the
maxPeerCountis the number of attempted peer disseminations. The default is set to
1but in a production environment with
npeers in an organization, the recommended setting is
tls: # Require server-side TLS enabled: false # Require client certificates / mutual TLS for inbound connections. # Note that clients that are not configured to use a certificate will # fail to connect to the peer. clientAuthRequired: false # X.509 certificate used for TLS server cert: file: tls/server.crt # Private key used for TLS server key: file: tls/server.key # rootcert.file represents the trusted root certificate chain used for verifying certificates # of other nodes during outbound connections. # It is not required to be set, but can be used to augment the set of TLS CA certificates # available from the MSPs of each channel’s configuration. rootcert: file: tls/ca.crt # If mutual TLS is enabled, clientRootCAs.files contains a list of additional root certificates # used for verifying certificates of client connections. # It augments the set of TLS CA certificates available from the MSPs of each channel’s configuration. # Minimally, set your organization's TLS CA root certificate so that the peer can receive join channel requests. clientRootCAs: files: - tls/ca.crt
Configure this section to enable TLS communications for the peer. After TLS is enabled, all nodes that transact with the peer will also need to enable TLS. Review the topic on Registering and enrolling identities with a CA for instructions on how to generate the peer TLS certificates.
enabled: (Default value should be overridden.) To ensure your production environment is secure, TLS should be enabled for all communications between nodes by setting
enabled: truein the
tlssection of the config file. While this field is disabled by default, which may be acceptable for a test network, it should to be enabled when in production. This setting will configure server-side TLS, meaning that TLS will guarantee the identity of the server to the client and provides a two-way encrypted channel between them.
cert.file: (Default value should be overridden.) Every peer needs to register and enroll with its TLS CA before it can transact securely with other nodes in the organization. Therefore, before you can deploy a peer, you must first register a user for the peer and enroll the peer identity with the TLS CA to generate the peer’s TLS signed certificate. If you are using the recommended folder structure from the Registering and enrolling identities with a CA topic, this file needs to be copied into
key.file: (Default value should be overridden.) Similar to the
cert.file, provide the name and location of the generated TLS private key for this peer, for example,
/msp/keystore/87bf5eff47d33b13d7aee81032b0e8e1e0ffc7a6571400493a7c_sk. If you are using the recommended folder structure from the Registering and enrolling identities with a CA topic, this file needs to be copied into
config/organizations/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls. If you are using an HSM to store the private key for the peer, this field will be blank.
rootcert.file: (Default value can be unset.) This value contains the name and location of the root certificate chain used for verifying certificates of other nodes during outbound connections. It is not required to be set, but can be used to augment the set of TLS CA certificates available from the MSPs of each channel’s configuration. If you are using the recommended folder structure from the Registering and enrolling identities with a CA topic, this file can be copied into
The next two parameters only need to be provided when mutual TLS is required:
clientAuthRequired: Defaults to
false. Set to
truefor a higher level of security by using mutual TLS, which can be configured as an extra verification step of the client-side TLS certificate. Where server-side TLS is considered the minimally necessary level of security, mutual TLS is an additional and optional level of security.
clientRootCAs.files: Contains a list of additional root certificates used for verifying certificates of client connections. It augments the set of TLS CA certificates available from the MSPs of each channel’s configuration. Minimally, set your organization’s TLS CA root certificate so that the peer can receive join channel requests.
BCCSP: Default: SW # Settings for the SW crypto provider (i.e. when DEFAULT: SW) SW: # TODO: The default Hash and Security level needs refactoring to be # fully configurable. Changing these defaults requires coordination # SHA2 is hardcoded in several places, not only BCCSP Hash: SHA2 Security: 256 # Location of Key Store FileKeyStore: # If "", defaults to 'mspConfigPath'/keystore KeyStore: # Settings for the PKCS#11 crypto provider (i.e. when DEFAULT: PKCS11) PKCS11: # Location of the PKCS11 module library Library: # Token Label Label: # User PIN Pin: Hash: Security:
(Optional) This section is used to configure the Blockchain crypto provider.
BCCSP.Default:If you plan to use a Hardware Security Module (HSM), then this must be set to
BCCSP.PKCS11.*:Provide this set of parameters according to your HSM configuration. Refer to this [example]((../hsm.html) of an HSM configuration for more information.
# List of directories to treat as external builders and launchers for # chaincode. The external builder detection processing will iterate over the # builders in the order specified below. externalBuilders:  # - path: /path/to/directory # name: descriptive-builder-name # propagateEnvironment: # - ENVVAR_NAME_TO_PROPAGATE_FROM_PEER # - GOPROXY
(Optional) New in Fabric 2.0. This section is used to configure a set of paths where your chaincode builders reside. Each external builder definition must include a name (used for logging) and the path to parent of the
bin directory containing the builder scripts. Also, you can optionally specify a list of environment variable names to propagate from the peer when it invokes the external builder scripts. For details see Configuring external builders and launchers.
externalBuilders.path:Specify the path to the builder.
externalBuilders.name:Give this builder a name.
externalBuilders.propagateEnvironment:Specify the list of environment variables that you want to propagate to your peer.
ledger: state: # stateDatabase - options are "goleveldb", "CouchDB" # goleveldb - default state database stored in goleveldb. # CouchDB - store state database in CouchDB stateDatabase: goleveldb couchDBConfig: # It is recommended to run CouchDB on the same server as the peer, and # not map the CouchDB container port to a server port in docker-compose. # Otherwise proper security must be provided on the connection between # CouchDB client (on the peer) and server. couchDBAddress: 127.0.0.1:5984 # This username must have read and write authority on CouchDB username: # The password is recommended to pass as an environment variable # during start up (eg CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD). # If it is stored here, the file must be access control protected # to prevent unintended users from discovering the password. password:
This section is used to select your ledger database type, either
CouchDB. To avoid errors all peers should use the same database type. CouchDB is an appropriate choice when JSON queries are required. While CouchDB runs in a separate operating system process, there is still a 1:1 relation between a peer node and a CouchDB instance, meaning that each peer will have a single database and that database will only be associated with that peer. Besides the additional JSON query capability of CouchDB, the choice of the database is invisible to a smart contract.
ledger.state.stateDatabase:(Override this value when you plan to use CouchDB.) Defaults to goleveldb which is appropriate when ledger states are simple key-value pairs. A LevelDB database is embedded in the peer node process.
ledger.state.couchDBConfig.couchDBAddress:(Required when using CouchDB.) Specify the address and port where CouchDB is running.
ledger.state.couchDBConfig.username:(Required when using CouchDB.) Specify the CouchDB user with read and write authority to the database.
ledger.state.couchDBConfig.password:(Required when using CouchDB.) Specify the password for the CouchDB user with read and write authority to the database.
ledger section also contains your default snapshot directory where snapshots are stored. For more information about snapshots, check out Taking ledger snapshots and using them to join channels.
snapshots: # Path on the file system where peer will store ledger snapshots rootDir: /var/hyperledger/production/snapshots
ledger.snapshots.rootDir:(Default value should be overridden.) This is the path to where snapshots are stored on the local filesystem of the peer. It can be an absolute path or relative to
FABRIC_CFG_PATHand defaults to
/var/hyperledger/production/snapshots. When the snapshot is taken, it is automatically organized by the status, channel name, and block number of the snapshot. For more information, check out Taking a snapshot. The user running the peer needs to own and have write access to this directory.
operations: # host and port for the operations server listenAddress: 127.0.0.1:9443 # TLS configuration for the operations endpoint tls: # TLS enabled enabled: false # path to PEM encoded server certificate for the operations server cert: file: # path to PEM encoded server key for the operations server key: file: # most operations service endpoints require client authentication when TLS # is enabled. clientAuthRequired requires client certificate authentication # at the TLS layer to access all resources. clientAuthRequired: false # paths to PEM encoded ca certificates to trust for client authentication clientRootCAs: files: 
The operations service is used for monitoring the health of the peer and relies on mutual TLS to secure its communication. Therefore, you need to set
true. When this parameter is set to
true, clients attempting to ascertain the health of the node are required to provide a valid certificate for authentication. If the client does not provide a certificate or the service cannot verify the client’s certificate, the request is rejected. This means that the clients will need to register with the peer’s TLS CA and provide their TLS signing certificate on the requests. See The Operations Service to learn more.
If you plan to use Prometheus metrics to monitor your peer, you must configure the operations service here.
In the unlikely case where two peers are running on the same node, you need to modify the addresses for the second peer to use a different port. Otherwise, when you start the second peer, it will fail to start, reporting that the addresses are already in use.
operations.listenAddress:(Required when using the operations service.) Specify the address and port of the operations server.
operations.tls.cert.file*:(Required when using the operations service). Can be the same file as the
operations.tls.key.file*:(Required when using the operations service). Can be the same file as the
operations.tls.clientAuthRequired*:(Required when using the operations service). Must be set to
trueto enable mutual TLS between the client and the server.
operations.tls.clientRootCAs.files*:(Required when using the operations service). Similar to the peer.tls.clientRootCAs.files, it contains a list of client root CA certificates that can be used to verify client certificates. If the client enrolled with the peer organization CA, then this value is the peer organization root CA cert.
metrics: # metrics provider is one of statsd, prometheus, or disabled provider: disabled # statsd configuration statsd: # network type: tcp or udp network: udp # statsd server address address: 127.0.0.1:8125
By default this is disabled, but if you want to monitor the metrics for the peer, you need to choose either
Prometheus as your metric provider.
Statsd uses a “push” model, pushing metrics from the peer to a
statsd endpoint. Because of this, it does not require configuration of the operations service itself. See the list of Available metrics for the peer.
provider: (Required to use
Prometheusmetrics for the peer.) Because Prometheus utilizes a “pull” model there is not any configuration required, beyond making the operations service available. Rather, Prometheus will send requests to the operations URL to poll for available metrics.
address:(Required when using
statsdis enabled, you will need to configure the hostname and port of the statsd server so that the peer can push metric updates.