Gossip data dissemination protocol¶
Hyperledger Fabric optimizes blockchain network performance, security, and scalability by dividing workload across transaction execution (endorsing and committing) peers and transaction ordering nodes. This decoupling of network operations requires a secure, reliable and scalable data dissemination protocol to ensure data integrity and consistency. To meet these requirements, Fabric implements a gossip data dissemination protocol.
Gossip protocol¶
Peers leverage gossip to broadcast ledger and channel data in a scalable fashion. Gossip messaging is continuous, and each peer on a channel is constantly receiving current and consistent ledger data from multiple peers. Each gossiped message is signed, thereby allowing Byzantine participants sending faked messages to be easily identified and the distribution of the message(s) to unwanted targets to be prevented. Peers affected by delays, network partitions, or other causes resulting in missed blocks will eventually be synced up to the current ledger state by contacting peers in possession of these missing blocks.
The gossip-based data dissemination protocol performs three primary functions on a Fabric network:
- Manages peer discovery and channel membership, by continually identifying available member peers, and eventually detecting peers that have gone offline.
- Disseminates ledger data across all peers on a channel. Any peer with data that is out of sync with the rest of the channel identifies the missing blocks and syncs itself by copying the correct data.
- Bring newly connected peers up to speed by allowing peer-to-peer state transfer update of ledger data.
Gossip-based broadcasting operates by peers receiving messages from other peers on the channel, and then forwarding these messages to a number of randomly selected peers on the channel, where this number is a configurable constant. Peers can also exercise a pull mechanism rather than waiting for delivery of a message. This cycle repeats, with the result of channel membership, ledger and state information continually being kept current and in sync. For dissemination of new blocks, the leader peer on the channel pulls the data from the ordering service and initiates gossip dissemination to peers in its own organization.
Leader election¶
The leader election mechanism is used to elect one peer per organization which will maintain connection with the ordering service and initiate distribution of newly arrived blocks across the peers of its own organization. Leveraging leader election provides the system with the ability to efficiently utilize the bandwidth of the ordering service. There are two possible modes of operation for a leader election module:
- Static — a system administrator manually configures a peer in an organization to be the leader.
- Dynamic — peers execute a leader election procedure to select one peer in an organization to become leader.
Static leader election¶
Static leader election allows you to manually define one or more peers within an
organization as leader peers. Please note, however, that having too many peers connect
to the ordering service may result in inefficient use of bandwidth. To enable static
leader election mode, configure the following parameters within the section of core.yaml
:
peer:
# Gossip related configuration
gossip:
useLeaderElection: false
orgLeader: true
Alternatively these parameters could be configured and overridden with environmental variables:
export CORE_PEER_GOSSIP_USELEADERELECTION=false
export CORE_PEER_GOSSIP_ORGLEADER=true
Note
The following configuration will keep peer in stand-by mode, i.e. peer will not try to become a leader:
export CORE_PEER_GOSSIP_USELEADERELECTION=false
export CORE_PEER_GOSSIP_ORGLEADER=false
- Setting
CORE_PEER_GOSSIP_USELEADERELECTION
andCORE_PEER_GOSSIP_ORGLEADER
withtrue
value is ambiguous and will lead to an error. - In static configuration organization admin is responsible to provide high availability of the leader node in case for failure or crashes.
Dynamic leader election¶
Dynamic leader election enables organization peers to elect one peer which will connect to the ordering service and pull out new blocks. This leader is elected for an organization’s peers independently.
A dynamically elected leader sends heartbeat messages to the rest of the peers as an evidence of liveness. If one or more peers don’t receive heartbeats updates during a set period of time, they will elect a new leader.
In the worst case scenario of a network partition, there will be more than one active leader for organization to guarantee resiliency and availability to allow an organization’s peers to continue making progress. After the network partition has been healed, one of the leaders will relinquish its leadership. In a steady state with no network partitions, there will be only one active leader connecting to the ordering service.
Following configuration controls frequency of the leader heartbeat messages:
peer:
# Gossip related configuration
gossip:
election:
leaderAliveThreshold: 10s
In order to enable dynamic leader election, the following parameters need to be configured
within core.yaml
:
peer:
# Gossip related configuration
gossip:
useLeaderElection: true
orgLeader: false
Alternatively these parameters could be configured and overridden with environment variables:
export CORE_PEER_GOSSIP_USELEADERELECTION=true
export CORE_PEER_GOSSIP_ORGLEADER=false
Anchor peers¶
Anchor peers are used by gossip to make sure peers in different organizations know about each other.
When a configuration block that contains an update to the anchor peers is committed, peers reach out to the anchor peers and learn from them about all of the peers known to the anchor peer(s). Once at least one peer from each organization has contacted an anchor peer, the anchor peer learns about every peer in the channel. Since gossip communication is constant, and because peers always ask to be told about the existence of any peer they don’t know about, a common view of membership can be established for a channel.
For example, let’s assume we have three organizations—A, B, C— in the channel and a single anchor peer—peer0.orgC— defined for organization C. When peer1.orgA (from organization A) contacts peer0.orgC, it will tell it about peer0.orgA. And when at a later time peer1.orgB contacts peer0.orgC, the latter would tell the former about peer0.orgA. From that point forward, organizations A and B would start exchanging membership information directly without any assistance from peer0.orgC.
As communication across organizations depends on gossip in order to work, there must be at least one anchor peer defined in the channel configuration. It is strongly recommended that every organization provides its own set of anchor peers for high availability and redundancy. Note that the anchor peer does not need to be the same peer as the leader peer.
External and internal endpoints¶
In order for gossip to work effectively, peers need to be able to obtain the endpoint information of peers in their own organization as well as from peers in other organizations.
When a peer is bootstrapped it will use peer.gossip.bootstrap
in its
core.yaml
to advertise itself and exchange membership information, building
a view of all available peers within its own organization.
The peer.gossip.bootstrap
property in the core.yaml
of the peer is
used to bootstrap gossip within an organization. If you are using gossip, you
will typically configure all the peers in your organization to point to an initial set of
bootstrap peers (you can specify a space-separated list of peers). The internal
endpoint is usually auto-computed by the peer itself or just passed explicitly
via core.peer.address
in core.yaml
. If you need to overwrite this value,
you can export CORE_PEER_GOSSIP_ENDPOINT
as an environment variable.
Bootstrap information is similarly required to establish communication across
organizations. The initial cross-organization bootstrap information is provided
via the « anchor peers » setting described above. If you want to make other peers
in your organization known to other organizations, you need to set the
peer.gossip.externalendpoint
in the core.yaml
of your peer.
If this is not set, the endpoint information of the peer will not be broadcast
to peers in other organizations.
To set these properties, issue:
export CORE_PEER_GOSSIP_BOOTSTRAP=<a list of peer endpoints within the peer's org>
export CORE_PEER_GOSSIP_EXTERNALENDPOINT=<the peer endpoint, as known outside the org>
Gossip messaging¶
Online peers indicate their availability by continually broadcasting « alive » messages, with each containing the public key infrastructure (PKI) ID and the signature of the sender over the message. Peers maintain channel membership by collecting these alive messages; if no peer receives an alive message from a specific peer, this « dead » peer is eventually purged from channel membership. Because « alive » messages are cryptographically signed, malicious peers can never impersonate other peers, as they lack a signing key authorized by a root certificate authority (CA).
In addition to the automatic forwarding of received messages, a state reconciliation process synchronizes world state across peers on each channel. Each peer continually pulls blocks from other peers on the channel, in order to repair its own state if discrepancies are identified. Because fixed connectivity is not required to maintain gossip-based data dissemination, the process reliably provides data consistency and integrity to the shared ledger, including tolerance for node crashes.
Because channels are segregated, peers on one channel cannot message or share information on any other channel. Though any peer can belong to multiple channels, partitioned messaging prevents blocks from being disseminated to peers that are not in the channel by applying message routing policies based on a peers” channel subscriptions.
Note
1. Security of point-to-point messages are handled by the peer TLS layer, and do not require signatures. Peers are authenticated by their certificates, which are assigned by a CA. Although TLS certs are also used, it is the peer certificates that are authenticated in the gossip layer. Ledger blocks are signed by the ordering service, and then delivered to the leader peers on a channel.
2. Authentication is governed by the membership service provider for the peer. When the peer connects to the channel for the first time, the TLS session binds with the membership identity. This essentially authenticates each peer to the connecting peer, with respect to membership in the network and channel.