Chaincode as an external service

Fabric v2.0 supports chaincode deployment and execution outside of Fabric that enables users to manage a chaincode runtime independently of the peer. This facilitates deployment of chaincode on Fabric cloud deployments such as Kubernetes. Instead of building and launching the chaincode on every peer, chaincode can now run as a service whose lifecycle is managed outside of Fabric. This capability leverages the Fabric v2.0 external builder and launcher functionality which enables operators to extend a peer with programs to build, launch, and discover chaincode. Before reading this topic you should become familiar with the External Builder and Launcher content.

Prior to the availability of the external builders, the chaincode package content was required to be a set of source code files for a particular language which could be built and launched as a chaincode binary. The new external build and launcher functionality now allows users to optionally customize the build process. With respect to running the chaincode as an external service, the build process allows you to specify the endpoint information of the server where the chaincode is running. Hence the package simply consists of the externally running chaincode server endpoint information and TLS artifacts for secure connection. TLS is optional but highly recommended for all environments except a simple test environment.

The rest of this topic describes how to configure chaincode as an external service:

Note: This is an advanced feature that will likely require custom packaging of the peer image. For example, the following samples use jq and bash, which are not included in the current official fabric-peer image.

Packaging chaincode

With the Fabric v2.0 chaincode lifecycle, chaincode is packaged and installed in a .tar.gz format. The following myccpackage.tgz archive demonstrates the required structure:

$ tar xvfz myccpackage.tgz
metadata.json
code.tar.gz

The chaincode package should be used to provide two pieces of information to the external builder and launcher process

  • identify if the chaincode is an external service. The bin/detect section describes an approach using the metadata.json file
  • provide chaincode endpoint information in a connection.json file placed in the release directory. The bin/run section describes the connection.json file

There is plenty of flexibility to gathering the above information. The sample scripts in the External builder and launcher sample scripts illustrate a simple approach to providing the information. As an example of flexibility, consider packaging couchdb index files (see Add the index to your chaincode folder). Sample scripts below describe an approach to packaging the files into myccpackage.tar.gz.

tar cfz code.tar.gz connection.json metadata
tar cfz myccpackage.tgz metadata.json code.tar.gz

Configuring a peer to process external chaincode

In this section we go over the configuration needed

  • to detect if the chaincode package identifies an external chaincode service
  • to create the connection.json file in the release directory

Modify the peer core.yaml to include the externalBuilder

Assume the scripts are on the peer in the bin directory as follows

    <fully qualified path on the peer's env>
    └── bin
        ├── build
        ├── detect
        └── release

Modify the chaincode stanza of the peer core.yaml file to include the externalBuilders configuration element:

externalBuilders:
     - name: myexternal
       path: <fully qualified path on the peer's env>   

External builder and launcher sample scripts

To help understand what each script needs to contain to work with the chaincode as an external service, this section contains samples of bin/detect bin/build, bin/release, and bin/run scripts.

Note: These samples use the jq command to parse json. You can run jq --version to check if you have it installed. Otherwise, install jq or suitably modify the scripts.

bin/detect

The bin/detect script is responsible for determining whether or not a buildpack should be used to build a chaincode package and launch it. For chaincode as an external service, the sample script looks for a type property set to external in the metadata.json file:

{"path":"","type":"external","label":"mycc"}

The peer invokes detect with two arguments:

bin/detect CHAINCODE_SOURCE_DIR CHAINCODE_METADATA_DIR

A sample bin/detect script could contain:

#!/bin/bash

set -euo pipefail

METADIR=$2
#check if the "type" field is set to "external"
if [ "$(jq -r .type "$METADIR/metadata.json")" == "external" ]; then
    exit 0
fi

exit 1

bin/build

For chaincode as an external service, the sample build script assumes the chaincode package’s code.tar.gz file contains connection.json which it simply copies to the BUILD_OUTPUT_DIR. The peer invokes the build script with three arguments:

bin/build CHAINCODE_SOURCE_DIR CHAINCODE_METADATA_DIR BUILD_OUTPUT_DIR

A sample bin/build script could contain:

#!/bin/bash

set -euo pipefail

SOURCE=$1
OUTPUT=$3

#external chaincodes expect connection.json file in the chaincode package
if [ ! -f "$SOURCE/connection.json" ]; then
    >&2 echo "$SOURCE/connection.json not found"
    exit 1
fi

#simply copy the endpoint information to specified output location
cp $SOURCE/connection.json $OUTPUT/connection.json

if [ -d "$SOURCE/metadata" ]; then
    cp -a $SOURCE/metadata $OUTPUT/metadata
fi

exit 0

bin/release

For chaincode as an external service, the bin/release script is responsible for providing the connection.json to the peer by placing it in the RELEASE_OUTPUT_DIR. The connection.json file has the following JSON structure

  • address - chaincode server endpoint accessible from peer. Must be specified in “:” format.
  • dial_timeout - interval to wait for connection to complete. Specified as a string qualified with time units (e.g, “10s”, “500ms”, “1m”). Default is “3s” if not specified.
  • tls_required - true or false. If false, “client_auth_required”, “client_key”, “client_cert”, and “root_cert” are not required. Default is “true”.
  • client_auth_required - if true, “client_key” and “client_cert” are required. Default is false. It is ignored if tls_required is false.
  • client_key - PEM encoded string of the client private key.
  • client_cert - PEM encoded string of the client certificate.
  • root_cert - PEM encoded string of the server (peer) root certificate.

For example:

{
  "address": "your.chaincode.host.com:9999",
  "dial_timeout": "10s",
  "tls_required": "true",
  "client_auth_required": "true",
  "client_key": "-----BEGIN EC PRIVATE KEY----- ... -----END EC PRIVATE KEY-----",
  "client_cert": "-----BEGIN CERTIFICATE----- ... -----END CERTIFICATE-----",
  "root_cert": "-----BEGIN CERTIFICATE---- ... -----END CERTIFICATE-----"
}

As noted in the bin/build section, this sample assumes the chaincode package directly contains the connection.json file which the build script copies to the BUILD_OUTPUT_DIR. The peer invokes the release script with two arguments:

bin/release BUILD_OUTPUT_DIR RELEASE_OUTPUT_DIR

A sample bin/release script could contain:

#!/bin/bash

set -euo pipefail

BLD="$1"
RELEASE="$2"

if [ -d "$BLD/metadata" ]; then
   cp -a "$BLD/metadata/"* "$RELEASE/"
fi

#external chaincodes expect artifacts to be placed under "$RELEASE"/chaincode/server
if [ -f $BLD/connection.json ]; then
   mkdir -p "$RELEASE"/chaincode/server
   cp $BLD/connection.json "$RELEASE"/chaincode/server

   #if tls_required is true, copy TLS files (using above example, the fully qualified path for these fils would be "$RELEASE"/chaincode/server/tls)

   exit 0
fi

exit 1

Writing chaincode to run as an external service

Currently, the chaincode as an external service model is supported by Go chaincode shim and Node.js chaincode shim.

Go

In Fabric v2.0, the Go shim API provides a ChaincodeServer type that developers should use to create a chaincode server. The Invoke and Query APIs are unaffected. Developers should write to the shim.ChaincodeServer API, then build the chaincode and run it in the external environment of choice. Here is a simple sample chaincode program to illustrate the pattern:

package main

import (
        "fmt"

        "github.com/hyperledger/fabric-chaincode-go/shim"
        pb "github.com/hyperledger/fabric-protos-go/peer"
)

// SimpleChaincode example simple Chaincode implementation
type SimpleChaincode struct {
}

func (s *SimpleChaincode) Init(stub shim.ChaincodeStubInterface) pb.Response {
        // init code
}

func (s *SimpleChaincode) Invoke(stub shim.ChaincodeStubInterface) pb.Response {
        // invoke code
}

//NOTE - parameters such as ccid and endpoint information are hard coded here for illustration. This can be passed in in a variety of standard ways
func main() {
       //The ccid is assigned to the chaincode on install (using the “peer lifecycle chaincode install <package>” command) for instance
        ccid := "mycc:fcbf8724572d42e859a7dd9a7cd8e2efb84058292017df6e3d89178b64e6c831"

        server := &shim.ChaincodeServer{
                        CCID: ccid,
                        Address: "myhost:9999"
                        CC: new(SimpleChaincode),
                        TLSProps: shim.TLSProperties{
                                Disabled: true,
                        },
                }
        err := server.Start()
        if err != nil {
                fmt.Printf("Error starting Simple chaincode: %s", err)
        }
}

The key to running the chaincode as an external service is the use of shim.ChaincodeServer. This uses the new shim API shim.ChaincodeServer with the chaincode service properties described below:

  • CCID (string)- CCID should match chaincode’s package name on peer. This is the CCID associated with the installed chaincode as returned by the peer lifecycle chaincode install <package> CLI command. This can be obtained post-install using the “peer lifecycle chaincode queryinstalled” command.
  • Address (string) - Address is the listen address of the chaincode server
  • CC (Chaincode) - CC is the chaincode that handles Init and Invoke
  • TLSProps (TLSProperties) - TLSProps is the TLS properties passed to chaincode server
  • KaOpts (keepalive.ServerParameters) - KaOpts keepalive options, sensible defaults provided if nil

Then build the chaincode as suitable to your Go environment.

Node.js

fabric-shim package for Node.js chaincode provides the shim.server API to run chaincode as an external service. If you are using contract APIs, you may want to use the server command provided by fabric-chaincode-node CLI to run a contract in the external service mode.

The following is a sample chaincode using fabric-shim:

const shim = require('fabric-shim');

class SimpleChaincode extends shim.ChaincodeInterface {
        async Init(stub) {
                // ... Init code
        }
        async Invoke(stub) {
                // ... Invoke code
        }
}

const server = shim.server(new SimpleChaincode(), {
        ccid: "mycc:fcbf8724572d42e859a7dd9a7cd8e2efb84058292017df6e3d89178b64e6c831",
        address: "0.0.0.0:9999"
});

server.start();

To run a chaincode with the fabric-contract API as an external service, simply use fabric-chaincode-node server instead of fabric-chaincode-node start. Here is a sample for package.json:

{
        "scripts": {
                "start": "fabric-chaincode-node server"
        },
        ...
}

When fabric-chaincode-node server is used, the following options should be set as either arguments or environment variables:

  • CORE_CHAINCODE_ID (–chaincode-id): See CCID in the Go chaincode above.
  • CORE_CHAINCODE_ADDRESS (–chaincode-address): See Address in the Go chaincode above.

If TLS is enabled, the following additional options are required:

  • CORE_CHAINCODE_TLS_CERT_FILE (–chaincode-tls-cert-file): path to a certificate
  • CORE_CHAINCODE_TLS_KEY_FILE (–chaincode-tls-key-file): path to a private key

When mutual TLS is enabled, CORE_CHAINCODE_TLS_CLIENT_CACERT_FILE (–chaincode-tls-client-cacert-file) option should be set to specify the path to the CA certificate for acceptable client certificates.

Deploying the chaincode

When the chaincode is ready for deployment, you can package the chaincode as explained in the Packaging chaincode section and deploy the chaincode as explained in the Fabric chaincode lifecycle concept topic.

Running the chaincode as an external service

Create the chaincode as specified in the Writing chaincode to run as an external service section. Run the built executable in your environment of choice, such as Kubernetes or directly as a process on the peer machine.

Using this chaincode as an external service model, installing the chaincode on each peer is no longer required. With the chaincode endpoint deployed to the peer instead and the chaincode running, you can continue the normal process of committing the chaincode definition to the channel and invoking the chaincode.