Updating the capability level of a channel

Audience: network administrators, node administrators

If you’re not familiar with capabilities, check out Capabilities before proceeding, paying particular attention to the fact that peers and orderers that belong to the channel must be upgraded before enabling capabilities.

For information about any new capability levels in the latest release of Fabric, check out Upgrading your components.

Note: when we use the term “upgrade” in Hyperledger Fabric, we’re referring to changing the version of a component (for example, going from one version of a binary to the next version). The term “update,” on the other hand, refers not to versions but to configuration changes, such as updating a channel configuration or a deployment script. As there is no data migration, technically speaking, in Fabric, we will not use the term “migration” or “migrate” here.

Prerequisites and considerations

If you haven’t already done so, ensure you have all of the dependencies on your machine as described in Prerequisites. This will ensure that you have the latest versions of the tools required to make a channel configuration update.

Although Fabric binaries can and should be upgraded in a rolling fashion, it is important to finish upgrading binaries before enabling capabilities. Any binaries which are not upgraded to at least the level of the relevant capabilities will crash to indicate a misconfiguration which could otherwise result in a ledger fork.

Once a capability has been enabled, it becomes part of the permanent record for that channel. This means that even after disabling the capability, old binaries will not be able to participate in the channel because they cannot process beyond the block which enabled the capability to get to the block which disables it. As a result, once a capability has been enabled, disabling it is neither recommended nor supported.

For this reason, think of enabling channel capabilities as a point of no return. Please experiment with the new capabilities in a test setting and be confident before proceeding to enable them in production.

Overview

Whether you will need to update every part of the configuration for all of your channels will depend on the contents of the latest release as well as your own use case. For more information, check out Upgrading to the latest version of Fabric. Note that it may be necessary to update to the newest capability levels before using the features in the latest release, and it is considered a best practice to always be at the latest binary versions and capability levels.

Because updating the capability level of a channel involves the configuration update transaction process, we will be relying on our Updating a channel configuration topic for many of the commands.

As with any channel configuration update, updating capabilities is, at a high level, a three step process (for each channel):

  1. Get the latest channel config

  2. Create a modified channel config

  3. Create a config update transaction

Recall from the conceptual topic on capabilities that three types of capabilities exist, reflecting the three areas of administration:

  • Orderer group

  • Channel group

  • Application group

While it is possible to edit multiple parts of the configuration of a channel at the same time, in this tutorial we will show how this process is done incrementally. In other words, we will not bundle a change to the Orderer group and the Channel group into one configuration change. This is because not every release will have both a new Orderer group capability and a Channel group capability.

Note that in production networks, it will not be possible or desirable for one user to be able to update all of these channels (and parts of configurations) unilaterally. Updating either the Orderer or Channel groups of a channel configuration, for example, requires the signature of an ordering service organization in addition to peer organizations. Distributed systems require collaborative management.

Create a capabilities config file

Note that this tutorial presumes that a file called capabilities.json has been created and includes the capability updates you want to make to the various sections of the config. It also uses jq to apply the edits to the modified config file.

Note that you are not obligated to create a file like capabilities.json or to use a tool like jq. The modified config can also be edited manually (after it has been pulled, translated, and scoped). Check out this sample channel configuration for reference.

However, the process described here (using a JSON file and a tool like jq) does have the advantage of being scriptable, making it suitable for proposing configuration updates to a large number of channels. This is why it is the recommended way to update channels.

In this example, the capabilities.json file looks like this (note: if you are updating your channel as part of Upgrading to the latest version of Fabric you will need to set the capabilities to the levels appropriate to that release):

   {
     "channel": {
         "mod_policy": "Admins",
             "value": {
                 "capabilities": {
                     "V3_0": {}
                 }
             },
         "version": "0"
     },
     "orderer": {
         "mod_policy": "Admins",
             "value": {
                 "capabilities": {
                     "V2_0": {}
                 }
             },
         "version": "0"
     },
     "application": {
         "mod_policy": "Admins",
             "value": {
                 "capabilities": {
                     "V2_5": {}
                 }
             },
         "version": "0"
     }
   }

Update capabilities on existing channels

Make sure all of the ordering nodes in your ordering service and peers on the channel have been upgraded to the required binary level before updating capabilities. If a peer or an ordering node is not at the required level, it will be unable to process the config block with the capability and will crash. For more information, check out Capabilities.

Set environment variables

You will need to export the following variables:

  • CH_NAME: the name of the application channel being updated. You will have to reset this variable for every channel you update.

  • CORE_PEER_LOCALMSPID: the MSP ID of the organization proposing the channel update. This will be the MSP of your peer organization.

  • TLS_ROOT_CA: the absolute path to the TLS cert of your peer organization.

  • CORE_PEER_MSPCONFIGPATH: the absolute path to the MSP representing your organization.

  • ORDERER_CONTAINER: the name of an ordering node container. When targeting the ordering service, you can target any particular node in the ordering service. Your requests will be forwarded to the leader automatically.

Orderer group

Navigate to Step 1: Pull and translate the config. Once you have a modified_config.json, add the capabilities to the Orderer group of the config (as listed in capabilities.json) using this command:

jq -s '.[0] * {"channel_group":{"groups":{"Orderer": {"values": {"Capabilities": .[1].orderer}}}}}' config.json ./capabilities.json > modified_config.json

Then, follow the steps at Step 3: Re-encode and submit the config.

Note the mod_policy for this capability defaults to the MAJORITY of the Admins of the Orderer group (in other words, a majority of the admins of the ordering service). Peer organizations can propose an update to this capability, but their signatures will not satisfy the default policy in this case.

Channel group

Navigate to Step 1: Pull and translate the config. Once you have a modified_config.json, add the capabilities to the Channel group of the config (as listed in capabilities.json) using this command:

jq -s '.[0] * {"channel_group":{"values": {"Capabilities": .[1].channel}}}' config.json ./capabilities.json > modified_config.json

Then, follow the steps at Step 3: Re-encode and submit the config.

Note that the mod_policy for this capability defaults to requiring signatures from both the MAJORITY of Admins in the Application and Orderer groups. In other words, both a majority of the peer organization admins and ordering service organization admins must sign this request.

Application group

Navigate to Step 1: Pull and translate the config. Once you have a modified_config.json, add the capabilities to the Application group of the config (as listed in capabilities.json) using this command:

jq -s '.[0] * {"channel_group":{"groups":{"Application": {"values": {"Capabilities": .[1].application}}}}}' config.json ./capabilities.json > modified_config.json

Then, follow the steps at Step 3: Re-encode and submit the config.

Note that the mod_policy for this capability defaults to requiring signatures from the MAJORITY of Admins in the Application group. In other words, a majority of peer organizations will need to approve. Ordering service admins have no say in this capability.

As a result, be very careful to not change this capability to a level that does not exist. Because ordering nodes neither understand nor validate Application capabilities, they will approve a configuration to any level and send the new config block to the peers to be committed to their ledgers. However, the peers will be unable to process the capability and will crash. And even it was possible to drive a corrected configuration change to a valid capability level, the previous config block with the faulty capability would still exist on the ledger and cause peers to crash when trying to process it.

This is one reason why a file like capabilities.json can be useful. It prevents a simple user error — for example, setting the Application capability to V25 when the intent was to set it to V2_5 — that can cause a channel to be unusable and unrecoverable.

Verify a transaction after capabilities have been enabled

It’s a best practice to ensure that capabilities have been enabled successfully with a chaincode invoke on all channels. If any nodes that do not understand new capabilities have not been upgraded to a sufficient binary level, they will crash. You will have to upgrade their binary level before they can be successfully restarted.